- Hits: 325
Electrolyser whole system Test #2 05.07.2022
00002: WHOLE SYSTEME TEST
Step |
Step Description |
Expected Result |
Result |
Precondition |
System is off |
|
|
open the valves V1 and V1 |
open the valves V1 and V1 from the GUI |
the valve v1 anv d v2 are open and enable to let the nitrogene gas pass |
|
WASH THE SYSTEM WITH NITROGENE |
Wash the system with Nitrogenen for few minutes BY TURNING ON THE VALVE on the nitrogene tank
|
-one can see that there is nitrogene exit from the gas outlets |
|
Switch on the system |
Turn off the nitrogene Turn on the systeme from the GUI
|
THE SYSTEM IS GENERATING hydrogene and oxygene |
|
Burn the hydrogene |
Turn on the transformator |
The Hidrogene is burning |
|
Switch off the system. |
Switch off the system from thGUI Switch off the transformator
|
The system goes down. |
|
WASH THE SYSTEM WITH NITROGENE |
Wash the system with Nitrogenen for few minutes BY TURNING ON THE VALVE on the nitrogene tank
|
All the hydrogene existing in the pipe systeme exeit |
|
Postcondition |
systeme is off |